Video game artwork: In The Hunt – PSOne

In The Hunt original game artwork used in PlayStation One longbox edition.

Few years ago I had stopped collecting PSOne games altogether and sold them off on eBay in order to concentrate more on Nintendo. But I do miss those longbox ones. They were different. They towered over the crowd of DVD and jewel cases (pun intended). Same goes for Sega CD games which I still have a few of.

source: http://www.comicartfans.com/

PlayStation Jampack cover template – Download & Tips

PlayStation Jampack template

PlayStation Jampack template

After some perturbations with my artwork, layout is finally finished. I went through way too many versions, created way too many files and at the end, decided to go back to original cover, which includes Underground logo. Whoever is responsible for creating this logo should get some kudos. The “U” is just so intricate and creative, that I think Sony should have keep it on its products.

Read before you print & cut.

PlayStation Jampack template

Printed & ready to cut!

Before posting anything, I’ve made sure that everything fits. And fit it does!

From Captain Obvious:
Paper: glossy photo quality paper is best choice. (I used regular paper just for the purpose of presentation)
Straight edge: a good quality ruler is a must. Better if you have a metal one (it seems I’ve misplaced mine somewhere).
Cutting tool: an X-acto knife is good. I prefer an OLFA Stainless Steel Slide-Lock Graphics Knife SAC-1. Been using it for ages for various printing projects and other crafts.
Cutting mat: these are extremely helpful and great for other crafts. If you don’t have one, try investing. They are not that expensive. I use Darice cutting mat 10×16″.

PlayStation Jampack template - bleed area

PlayStation Jampack template – bleed area

Bleed area/Overprint

When designing your layout, remember that you need your image a bit bigger from the actual cover to get a nice, clean cut.

PlayStation Jampack template - cutting tips

PlayStation Jampack template – cutting tips

Cutting

Do not cut all the way through the sheet of paper, as you’ll remove the guide lines and will not be able to get dimensions correctly. This is important and will save you a lot of trouble. As you can see, I had printed a blank cover just to make sure all dimensions check out. Once cut, your sheet should look like this:

PlayStation Jampack template - cover cutaway

PlayStation Jampack template – cover cutaway

Folding

Cover needs to be folded in the middle. The best way to get a perfect fold, is to make two short cuts above and below the print area on the dotted line. Same applies to folding the spines.

PlayStation Jampack template - cut mark

PlayStation Jampack template – cut mark

Next, flip the page face down, place the ruler on cut marks you’ve just made and score it with something pointy, but not sharp. A thin, dull knife can come in handy. Remember, do it carefully. We want to make a nice crease to get a perfect fold.

PlayStation Jampack template - crease line

PlayStation Jampack template – crease line

After all said & done, your cover will fit perfectly into your CD jewel case.

So, this is it. Now it’s your turn. PlayStation Jampack cover template files can be downloaded here:

PlayStation Jampack template

PlayStation Jampack template

Front: Jampack booklet

Back: Jampack CD inlay

So, that’s all folks. I enjoyed this project and I hope so will you. If you have some questions, suggestions or ideas for other layouts, let me know.

PlayStation Jampack cover project – update 1

PS Jampack CD cover template - work in progress

PS Jampack CD cover template – work in progress

Being influenced by edward_v12 photo stream (lots of photos of PS1 jampacks) and after finishing making PS2 Jampack template I moved onto PlayStation territory. Few posts ago I’ve redone the Underground logo (don’t worry, I’ll post soon) and now I had some time to start working on cover for it.

Why? First, because I think no one had done it. Second, I just like color scheme. Third, it’s relatively simple to do. So picture above shows a work in progress, one below shows the original scan. I can see already, that making “2.2” will be a small challenge for me. That’s because I’m going to try a 3D text. If I fail, I’ll be forced to do it by hand. I’d like to find a font as close to the original as possible, this would allow me to change the digits in the future.

PlayStation 2.2 Jampack original cover

PlayStation 2.2 Jampack original cover

So, I placed image in a working space, drew few lines, added stainless steel background and voilà! Front is ready. In next post I’ll move onto sides and back. Will keep you informed about the progress. Once done, the cover will be released.

I do have few loose PS demo disks and this cover would make it a good home for them. If you’re in a similar situation and like this project, please stay tuned.